+8618006368428
sellelevator@163.com
The adjustment can be raised normally at the start， but it cannot be adjusted when the adjustment is halfway: one is that the starting capacitor is damaged， and the other is that the remaining oil in the hydraulic oil filter element is not enough.
5The hydraulic freight elevator manufacturer reminds you that there are two points that need to be paid attention to for the safety of the guide rail elevator operation， the mechanical operation of the guide rail elevator should be gentle and smooth， and the cargo should be evenly loaded.
fHodmezova SahliAs the name implies， hydraulic freight elevators are used to transport goods，Hydraulic ladder usually between two or more points on the floor. Its main ability is to transport goods. In laymans terms，ChamberleyMicro hydraulic lifting platformHow to select equipment it is similar to an elevator， but it is just an elevator for goods. So how high can this hydraulic freight elevator be?
Secondly， lets take a look at how to choose a hydraulic lifting platform. When purchasing a hydraulic lifting platform， work frequency， utilization rate， rated lifting capacity and other factors， and choose a hydraulic lifting platform that is suitable for the unit. Ask for a working grade lift. Carry out market research according to the proposed technical parameters. The first condition for choosing a supplier is the reputation of the manufacturer， and then the after-sales service capability.
FViryandiAC contactors can also generate high noise. When the power supply voltage is lower than % of the rated voltage， the short-circuit ring of the contactor core is broken，Hydraulic ladder the contact surface between the yoke and the armature is skewed， dust or rust is in poor contact， containers， mold manufacturing， wood processing， and chemical filling. Turntable， steering， tipping， telescopic)， with various methods (separate，Hydraulic ladder linkage， anti)，ChamberleyMicro hydraulic lifting platformHow to select equipment has the characteristics of stable and accurate lifting， frequent starting， heavy load， effectively solves the difficulties of various lifting operations in industrial enterprises， and enables production Take it easy.
Advantages in operating costs: Low failure rate: due to the hydraulic system and good performance， the operation failure rate of hydraulic upgraded freight elevators can be reduced to relatively low; low power consumption: when the hydraulic elevator descends， it is driven by the pressure generated by its own weight， which greatly saves energy.
It is strictly forbidden for staff to leave their posts to wipe lubricate or repair hydraulic lifts. After the work is completed，Elevator Price_ Hydraulic ladder_ Household elevator_ Household elevator - elevator manufacturer the staff should cut off the power， lock it out， and leave the post， and fill out the delivery record.
mThe electro-hydraulic freight elevator is equipped with a safety protection valve to prevent the hydraulic pipe from breaking.
WFinally， don’t forget that you must write down the phone number of the sales manufacturer， especially the technical department， so that even if there is a problem， you can communicate and solve it. In fact， there are many small problems that can be solved with just one phone call. With cooperation， please note that you can choose a hydraulic lift that suits your business and purpose.
HTotal quality assuranceElectrical equipment or component failure The hydraulic freight elevator manufacturer tells you that the main reasons for the high noise of the electric motor are: the motor rotor is bent， severely worn or the bearing is damaged， it can also cause vibration and generate high noise.
sFWhen moving or towing the hydraulic platform， the supporting legs should be retracted and the platform should be lowered to a low position. It is strictly forbidden for operators to move the platform when it is in a high position.
If oil leaks from the oil pipeline check whether the standard interface is damaged， check whether the O-shaped hydraulic seal is damaged， replace the hydraulic seal or replace the standard interface as a whole.
The hydraulic lifting platform often checks the connection status of each part， and tightens it if it is loose. The connection bolts of the body should be checked for tightness when the body of the elevator is under pressure (the rotating arm can be used to form a state of compression)， and all connecting shafts must have cotter pins and must be fully opened.
Standard requirementsxSafety and stability advantages Relief valve: can prevent the system pressure from being too high during upward movement Emergency manual valve: When the power fails， it can make the car drop down to the nearest floor in an emergency to open the door， Manual pump: When the system fails， it can Manipulate the manual pump to pump out high-pressure oil to raise the car to the nearest floor; Oil temperature protection of the oil tank: When the oil temperature in the oil tank exceeds the standard setting value the oil temperature protection device will send out a signal to suspend the use of the elevator. Start the elevator.
PDuring maintenance， remove the fuel tank cover， filter cover， detection hole， hydraulic oil pipe and other parts of the freight elevator in the factory building. If the oil passage of the system is exposed， dust should be avoided， and the disassembled parts must be thoroughly cleaned before opening. For example， when removing the fuel cap of the hydraulic oil tank， first remove the soil around the cap， loosen the cap， and remove the debris remaining at the joint (do not rinse with water to prevent water from seeping into the fuel tank)， and then open it after confirming that it is clean Fuel tank cap. If you need to use a wiping material and a hammer， you should choose a wiping material that does not remove fiber impurities and a special hammer for bonding rubber to the surface. Hydraulic components and hydraulic hoses should be carefully cleaned and assembled after drying with high-pressure air. Jinan Bali Elevator reminds everyone to choose a well-packed filter element (even if the filter element is intact， it may be unclean). Clean the filter at the same time when changing the oil， and carefully clean the dirt on the bottom of the filter shell with wiping material before installing the filter element.
Even if it is rainy and the temperature is not adjusted， please check whether the panel of the power box is damp and cold: please dry it with a hair dryer.
fHodmezova SahliLow power consumption: When the hydraulic elevator is going down it is driven by the pressure generated by its own weight， and it is greatly energy-saving. When using it in daily life， the guide rail type elevator should pay attention to maintenance to prolong its life. Understand the maintenance and maintenance of mechanical equipment: the brakes of each mechanism should be checked frequently and the gap between the brake shoe and the brake wheel should be adjusted to ensure flexibility and reliability. There should be no dirt on the friction surface， it must be washed off with gasoline or thinner.
nFDo not adjust or retract the outriggers when the mobile lift is occupied or raised.
It can reduce the investment cost: the top distance (OH) can be more than m and the machine room can be set according to the building position， making the building layout more reasonable and beautiful， and reflecting the overall value. Simple troubleshooting: When the hydraulic elevator is shut down due to a power failure or fault， the management personnel can simply operate the steps to save people.