SarovaFixed hydraulic lifting platformApplication in Mechanical Steel Structures

To ensure that there is a suitable power supply at the installation site， the distribution box needs to be maintained separately. The distribution box should have a leakage switch. The hydraulic freight elevator construction site should be equipped with a fire extinguisher to prevent fires caused by welding operations. The leakage switch should be selected according to the operating power.

0The hydraulic freight elevator manufacturer tells you the reason and the elimination method: Reason: Overload Elimination method: Just reduce the load Reason: The oil return valve is not closed Elimination method: Tighten the oil return valve to eliminate Cause: The one-way valve of the manual pump is stuck， Return failure cleaning method: unscrew the valve port bolt of the oil pump， overhaul clean， replace and clean the hydraulic oil to clean.

vSarovaToday， the manufacturer of hydraulic freight elevators will share with you another fixed scissor type hydraulic freight elevator. What are its characteristics?

Before work，Hydraulic ladder the staff close the movable doors at both ends of the guardrail and start the bell. It is strictly forbidden to work when the movable door of the guardrail is open. In the operation of the hydraulic elevator，BremenFixed hydraulic elevatorProfessional customization in case of special circumstances， the emergency stop switch can be used to stop the hydraulic elevator， but in normal operation， it is forbidden to use the emergency stop switch to stop.

PHamiltonDo not adjust or retract the outriggers when the mobile lift is occupied or raised.

LrOil leakage from the oil cylinder: If it is the sealing ring problem， replace the sealing ring. If the oil cylinder has sundries and debris wear， it is recommended to replace the oil cylinder with a new one.

Remember not to overload， overload is the root of many failures.

lifting platformTo check whether the gear oil in the oil tank reaches the standard volume， if the gear oil is insufficient， please add # gear oil，Hydraulic ladder which can be found in hardware stores.

eMake the foundation according to the basic plan pay attention to alignment， leveling， and alignment to ensure the basic level and various use requirements. The access road of the external construction hoist should be smooth and have enough parking space for equipment.

RSeparate type: loading and unloading are on different platforms.

TpackingThe hydraulic lifting platform is an indispensable and important operating equipment in society， and this is the case， hydraulic freight elevator wholesale manufacturers will often forget to maintain the hydraulic lifting platform， just like this， it will cause damage to the equipment， reduce work efficiency， and pose a threat to life safety Threat， therefore，Hydraulic ladder in order to prolong the service life of the hydraulic lifting platform， it is necessary to use and maintain the equipment reasonably. The following points are the maintenance of the hydraulic lifting platform.

nOIn the case of special maintenance at the airport，BremenFixed hydraulic elevatorProfessional customization it is necessary to use a special lifting platform to carry out the inspection of the mobile transmission system. It is a mobile birth equipment， and it is also a lifting platform specially used for maintenance of helicopters. It is precisely because his environment is very close to the airport， and the working hours are particularly long， so there are some necessary requirements for the equipment， in which the relative height that it can rise must be more than meters. When used， it must have very strong reliability and collapse resistance. In addition， after the work is carried out， we should be able to evacuate the work quickly and safely at the scene，Elevator Price_ Hydraulic ladder_ Household elevator_ Household elevator - elevator manufacturer without delaying the impact， or even touching the entire take-off and landing process of the airport， so as to ensure that the airport can take off and land safely.

When operating， it is necessary to strictly abide by the operating safety and maintenance instructions on the equipment， and learn to understand the safety issues in the use of high-altitude lifting platforms; non-professional maintenance personnel are prohibited from repairing and operating without permission. This is expressly prohibited， installation， installation， repair， disassembly When the lifting platform pump station and other components are opened， the internal pressure value must be zero， and no goods are allowed on the equipment; when the hydraulic pump station of the equipment is overhauled， cut off the power supply of the motor and all other electrical equipment in advance ， all power connections and changes must be operated by professional technicians; when we repair or disassemble the motor-driven hydraulic pump station， we cut off all power supplies in advance to ensure that the hydraulic station is always in a power-off state; The hydraulic oil in the hydraulic lifting platform is likely to have adverse effects on health. It is strictly forbidden to directly contact with the skin and eyes to prevent personal safety; it is strictly forbidden to disassemble various valves， joints， accessories， etc. on the pumping station of the hydraulic lifting platform without authorization. For other components， the looseness of any part may cause the load to drop and the equipment to be damaged; considering that the replacement of hydraulic oil may cause pollution to the environment， it is necessary to use a recovery container and take corresponding leak-proof and oil-absorbing measures ; Low failure rate: due to the use of advanced hydraulic system and good methods， the failure rate of elevator operation can be reduced to a minimum. Low power consumption: When the hydraulic elevator goes down， it is driven by the pressure generated by its own weight， which greatly saves energy.

When the hydraulic oil of the equipment is insufficient， it will not cause lifting. At this point， you only need to add enough hydraulic oil to run.

Work coursesgThe aluminum alloy lift is different from other forms. This kind of lift is made of aluminum alloy， which is light in weight and more beautiful in appearance. The disadvantage is that it has a light load and is only suitable for simple high-altitude maintenance work. It can only provide - Lifting work for people.

ZThe hydraulic freight elevator manufacturer tells you the precautions for working at heights.

The noise of the oil cylinder of the elevator is too low， and the air is sucked into the oil from the oil filter or the connection of the joint. The coupling is loose. The internal failure of the oil cylinder. Inhale the air or the oil pipe on the oil surface， mix the air into the oil and remove it: the concentricity should be adjusted to within .MM， correct the coupling， repair or replace the oil pump， replace the rotating shaft seal ring at the position of the oil filter and the joint above mm Clean the oil filter screen， filter the oil and lock the oil return pipe， extend the oil return pipe to the oil surface and the oil is mixed with air or the air in the hydraulic cylinder is not completely exhausted， and cavitation occurs under high pressure. cause loud noise. At this time， the air must be exhausted in time.

tSarovaThe contact surface of each part of the brush should be kept clean， speed up the flow of materials improve the efficiency of loading and unloading operations， and obtain greater economic benefits.

Lifting mechanism: The workbench should be lifted and lowered smoothly， and no jumping lifting phenomenon should occur. The moving parts should be flexible when moving， and there must be no jamming device: The lifting of the lift is divided into electric or manual hydraulic systems: components， pipelines and joints There must be no leakage.